Features - Output Power = 20W - Plug Type = 13A Plug - Supply Voltage = 220V/240V-50/60Hz - AC Cable Length = 1.5M - Soldering Tip = Ceramic Caution 1.Slight smoke may come out of the heater during first use. This is normal. will not occur in subsequent use. 2.Do not touch the metal parts and tipof soldering iron because it operates high temperature.Always use a soldering stand to enscure work environment safety and prevent fire hazards. 3.Do not pull out the soldering tip during operation.This will significantly shorten the life of the heating element. 4.Always let the soldering iron cool down naturally on the stand after use. 5.Do not file the surface of the long life tip. Operating Instructions 1.Plug in the soldering iron and leave on stand for a few minutes to warm up. 2.Use small scraper,sanpaper,or brush or oil from the working part tobe soldered. 3.Heat the working parts with the soldering iron. 4.Apply resin core solder wire tonthe heated working parts,(not the tip). Ensure solder is well spread before removing the soldering iron. 5.Use only enough solder and never too much.20W Soldering IronWith 8 gm Solder WireIron StandJapanese long life Tip