Suction Cup Mount is designed for a quick, easy & secure way to mount for GoPro and for SCAM action cameras.Suction Cup Mount comes with an Anti-Skid Rubber Base + easy press Button when mounting to surface. The suction cup can Universally fit other Makes of DSLR, Digital or Video cameras, that can accept 1/4 Screw and take a total of max. 500g in weight.With a 360 degree swivel and tilt action makes it easy to catch any angle.Specifications:Compatibility: For GoPro Hero 9, for Hero 8, for Hero 7, for Nikon, for Canon, for Sony, for SJCAM Action Camera, for YI and other cameras accepting 1/4 screwMax. load: 500g/ 17.6ozMaterial: PC + ABS + Stainless SteelHeight: 4-10.5cm/ 1.6-4.1inBase diameter: About 7cm/ 2.8inColor: BlackWeight: 81g/ 2.85ozPackage includes:1x Suction Cup Mount1x Tripod MountHow to Use:1. Remove the plastic film underneath the rubber pad.2. Mounting the Suction Cup, mount to a dry clean smooth surface. (Use a cloth or rag to make sure the surface is dry and clean)3. Mount the suction cup to the chosen surface, whilst holding the Press Button, Flip the Hinge over to the opposite side to create a strong vacuumed suction.4. Now you can mount your Camera to the suction cup screw adapter, and adjust the angle as required. 5. To un-mount the suction cup, just flip the hinge back to the opposite side again, then use one finger to slide the Small flap under suction pad up whilst lifting the entire suction cup mount from the surface.6. That's it all done: just make sure to always mount to a clean, dry, smooth surface.